This document describes ValueRAM's 1G x 64-bit (8GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 2Rx8, memorymodule, based on sixteen 512M x 8-bit FBGA components. TheSPD is programmed to JEDEC standard latency DDR3-1600timing of 11-11-11 at 1.5V. This 240-pin DIMM uses goldcontact fingers.
Kingston 16GB DDR4 ECC Registered 2133MHz CL15 w/Parity 288-Pin Power Supply: VDD=1.2V (1.14V to 1.26V) - VDDQ = 1.2V (1.14V to 1.26V) - VPP - 2.5V (2.375V to 2.75V) - VDDSPD=2.25V to 2.75V - Functionality and operations comply with the DDR4 SDRAM datasheet - 16 internal banks - Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S)... more for the banks in the same or different bank group accesses are available - Data transfer rates: PC4-2133, PC4-1866, PC4-1600 - Bi-Directional Differential Data Strobe - 8 bit pre-fetch - Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop) - Supports ECC error correction and detection - On-Die Termination (ODT) - Temperature sensor with integrated SPD - This product is in compliance with the RoHS directive. - Per DRAM Addressability is supported - Internal Vref DQ level generation is available - Write CRC is supported at all speed grades - CA parity (Command/Address Parity) mode is supported