Specifications |
ST4000NM0035 |
Formatted (512
bytes/sector)* |
4TB |
Guaranteed Sectors |
7,814,037,168 |
Heads |
7 |
Discs |
4 |
Bytes per logical
sector |
5125 |
Recording density,
KBPI (Kb/in max) |
2018 |
Track density, KTPI (ktracks/in
avg.) |
369 |
Areal density (Gb/in2
avg) |
732 |
Spindle speed (RPM) |
7200 |
Internal data transfer
rate (Mb/s max) |
2396 |
Sustained data
transfer rate OD (MiB/s max) |
205 (215 MB/s max) |
I/O data-transfer rate
(MB/s max) |
600 |
ATA data-transfer rate
(MB/s max) |
PIO modes 0-4
Multiword DMA modes 0-2
Ultra DMA modes 0-6 |
Cache buffer
|
128MB (129,536KB) |
Weight: (maximum) |
704g (1.55 lb) |
Average latency |
4.16ms |
Power-on to ready
(sec) (typ/max) |
22/30 |
Standby to ready (sec)
(typ/max) |
22/30 |
Startup current
(typical) 12V (peak) |
2.6A
2.0A(optional configuration through Smart Command Transport) |
Voltage tolerance
(including noise) |
5V +10/-5%
12V ±10% |
Non-Operating ambient
temperature (°C) |
-40 to 70 |
Operating ambient
temperature (°C) |
5 |
Operating temperature
(Drive case max °C) |
60 |
Temperature gradient
(°C per hour max) |
20°C (operating)
30°C (non-operating) |
Relative humidity |
5% to 95% (operating)
5% to 95% (non-operating) |
Relative humidity
gradient |
30% per hour max |
Altitude, operating |
-304.8 m to 3048 m
(-1000 ft to 10000 ft) |
Altitude,
non-operating (below mean sea level, max) |
-304.8 m to 12,192 m
(-1000 ft to 40000+ ft) |
Operational Shock (max
at 2 ms) |
Read 79 Gs/Write 40 Gs |
Non-Operational Shock
(max at 2 ms) |
250 Gs |
Vibration, operating |
5-22 Hz: 0.25 Gs, Limited displacement
22-350Hz: 0.50Gs
350-500Hz: 0.25 Gs |
Operational Rotational
vibration |
12-1500Hz: 12.5 rads/s2 |
Vibration,
non-operating |
100-500 Hz: 4.9 Grms ref |
Drive acoustics, sound
power (bels) |
|
Idle** |
2.8 (typical)
3.0 (max) |
Performance seek |
3.2 (typical)
3.4 (max) |
Nonrecoverable read
errors |
1 sector per 1015 bits read |
Annualized Failure
Rate (AFR) |
0.44% based on 8760 POH |
Maximum Rated Workload |
Maximum rate of
<550TB/year.
Workloads exceeding
the annualized rate may degrade the drive MTBF and impact product
reliability. The Annualized Workload Rate is in units of TB per year, or
TB per 8760 power on hours. Workload Rate = TB transferred * (8760 /
recorded power on hours). |
Warranty |
To determine the
warranty for a specific drive, use a web browser to access the following
web page:
http://www.seagate.com/support/warranty-and-replacements/.
From this page, click
on the “Is my Drive under Warranty” link. The following are required to
be provided: the drive serial number, model number (or part number) and
country of purchase. The system will display the warranty information
for the drive. |
Load-unload cycles |
600,000 |
Support Hotplug
operation per Serial ATA Revision 3.2 specification |
Yes |