16GB Kingston DDR4 ECC Registered 2133MHz CL15 w/Parity 288-Pin

Description

ValueRAM's KVR21R15D4/16 is a 2G x 72-bit (16GB) DDR4-2133 CL15 SDRAM (Synchronous DRAM) registered w/ parity, 2Rx4, ECC, memory module, based on thirty-six 1G x 4-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

Features

•   Power Supply: VDD=1.2V (1.14V to 1.26V)

•   VDDQ = 1.2V (1.14V to 1.26V)

•   VPP - 2.5V (2.375V to 2.75V)

•   VDDSPD=2.25V to 2.75V

•   Functionality and operations comply with the DDR4 SDRAM datasheet

•   16 internal banks

•   Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for

    the banks in the same or different bank group accesses are available

•   Data transfer rates: PC4-2133, PC4-1866, PC4-1600

•   Bi-Directional Differential Data Strobe

•   8 bit pre-fetch

•   Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)

•   Supports ECC error correction and detection

•   On-Die Termination (ODT)

•   Temperature sensor with integrated SPD

•   This product is in compliance with the RoHS directive.

•   Per DRAM Addressability is supported

•   Internal Vref DQ level generation is available

•   Write CRC is supported at all speed grades

•   CA parity (Command/Address Parity) mode is supported

Specifications

*Power will vary depending on the SDRAM used.